Bush Washing Machine Repairs Sheffield
Our experienced engineers will carry out repairs to your Bush washing machines and appliances in the Sheffield areas contact us on 01144910432
Bush Washing Machine Problems
If your experiencing some of these problems with your Bush washing machine this guide will help you out, or if you want one of our experienced engineers to come and do a washing machine repair in sheffield and quickly repair your machine please get in touch today!
Is your Bush washing machine not draining?
If you machine is still full of water at the end of the wash or your clothes are still wet after it has spun you could have a problem with the pump or blocked filter you may even have a error code 3 or 5 on your display
Is your Bush washing machine not heating the water up?
If your washing machine isnt heating the water up you may have a problem on the heater circuit or a faulty heater this may be showing as Error 4 on your display.
Is your Bush washing machine struggling to spin?
If your Bush washer isnt spinning this could be down to a faulty motor or worn brushes and could be showing Error 6 or 7 on your display.
Those are just a few of the most common problems we see with Bush washing machines, below is a list of other error codes for these Bush washing machines.
Bush washing machine error codes
Error 1
This is a door lock fault code it could be faulty wiring door switch or a problem with the door mechanism
Error 2
This is a drainage fault meaning the water has not left the machine in the allowed time usually around 5 minutes, there could be several reasons for this including pump, pump filter, wiring or switches
Error 3 and 5
Another drainage fault caused by thye same parts as error code 2
Error 4
You have a heating problem, caused by bad wiring, heater, thermistor or bad connectors
Error 6
Motor faults caused by tacho, wiring, brushes or motor failure.
Error 7
Another motor fault similar issues to fault code 6
Error 8
You have issues with over filling, this could be something as simple as over dosing with wash powder or you could have problems within the pressure sensor system that measures the water levels of the machine
Error 21
Drainage problems could be as simple as a blocked filter, or a failed pump
UNB
Is out of balance load, very easy to fix make sure there is the correct amount of clothes in the drum, some machines cannot spin a single heavy item and the out of balance is to protect the machine from damage caused by this